The trick with baking powder: It’s that easy to get the extractor hood clean again

When the soup is simmering on the stove or the fish is in the pan, most cooks also use the extractor. In many cases this is accompanied by a certain amount of noise, but the smells are minimized and the water vapor does not condense on the windows and walls. In the long term, this is also a health benefit, because it greatly reduces the risk of mold.

The extractor hood with its filters must, however, be cleaned regularly because the water vapor also contains grease that remains in the filter. Safety also plays a role here, as the fat in the fume cupboard could catch fire. But cleaning the extractor hood is very easy if you know how.

Cleaning the extractor hood – these methods are particularly good

Simply put the extractor hood filter in hot water with baking soda for some time. Then the dirt dissolves by itself.

Bild: Getty Images

To give the extractor a new look, a simple one is usually sufficient Washing-up liquid or alternatively a Fettlöse-Spray, which is then able to solve even worse soiling. The spray or washing-up liquid should take effect briefly, then work on with a soft, damp cloth. Scratchers or similar utensils are not used because they leave traces.

The really important task is still ahead: The metal filters have to be removed, which is just a flick of the wrist with most models. Then three paths open up:

With the brushto clean

The classic way is to fill the sink with warm water and pick up the dish brush. Then you scrub vigorously, which is exhausting and can splash. Thorough soaking is useful in advance, but often not easy with the unwieldy filters.

Extractor hood in the dishwashergive

The filters are used to the heat and can withstand being washed in the dishwasher without damage, even at the highest temperature setting. If they are very dirty, however, they should be stored horizontally in the machine. Ecologically, this is not a major win, because other objects hardly fit in. However, it achieves the desired cleaning effect.

Use baking soda

Another trick that relies on the fat-dissolving power of baking powder recently went viral on the Internet. The lifestyle portal “thelist.com” takes up the topic, for example, with the recommendation to bring the largest possible pot of water to the boil, gradually pour in a packet of baking powder and then soak the filter in this brew. This loosens the grease and any remaining residue can then be easily wiped off.

If the filter does not fit completely into the pot, it is simply turned after a short time. However, so that the procedure is not too laborious, it should be at least halfway covered by the water.

This post first appeared at bunte.de.

Leave a Comment